Shenzhen Fosen Technology Co., Ltd.
Main products:LED Power Supply,LED Tube Driver,LED Controller
Contact Us
  • Contact Person : Mr. Guo Victor
  • Company Name : Shenzhen Fosen Technology Co., Ltd.
  • Tel : 86-755-29826661
  • Fax : 86-755-29826662
  • Address : Guangdong,ShenZhen,5-6th Floor of building F, Tangtou Community, Sanlian Industrial Zone, Shiyan Street, Bao'an District, Shenzhen
  • Country/Region : China
  • Zip : 518108

RF wireless touched led rgb remote controller

RF wireless touched led rgb remote controller
Product Detailed
1.Touched led rgb remote controller 2.Support DC 12V 3.Max power 216W 4.Receiving range:20meters 5.Easy to use

Operating Instructions:

1.Touching ON/OFF button,you can switch on/off the RGB strip.

2.Slide the color button can adjust the same color.

3.Increasing color button can adjust the current color to the most vivid,dicreasing color button is contrary,until pure white.

4.You can adjust the brightness by dimming function,to brighten and dim the light.

5.Gradual change mode:Touch on buttom again under monochrome mode condition, RGB strip will be changed into gradual change mode .Increasing color button will speed up the color change,decreasing color button will slowdown.

6.Hopping mode:Under gradual change mode condition,touch on button,the RGB strip will be changed into hoppingmode.Increasing color button will speed up the hopping,decreasing color button will slowdown.

7.Under Gradual change or hopping mode,touching on switch will change one to the other.Close the RGB strip and restart it if you want to enter monochrome mode. 


 Thanks for using led controller FUT-005N manufactured by Futlight.One package includes:one controller,one remote control(without battery)one core-end terminal,one usage instruction.Please contact your supplier if any problems occur before you use. 

Safe instruction

Please follow the instructions to use safely.

          Attention! Operate Carefully! Please read the following tips carefully.

1, Donot install the product in areas with thundering,strong magnetic and high pressures.

2, Make sure the connection is right and firmed in case of fire accident caused by short circuit.

3,Please install the controller with ventilation to make sure the temperature is appropriate.

4,Please check whether the input voltage,power supply(constant pressure)acord with the requirements. 

5,Please donnot connect the power before connection. 

6,Please contact the supplier when problems occur.Don’t maintain by yourself.

7,The Instruction is for this Item Only,no notification if any amendments.  

Brief introduction

FUT-005N is a multifunction Touching RGB LED Controller. It adopts the most advanced PWM reomte control 

technology ,can control all the full color LED lighting with four lines three circuits(common anode),with more than 640000 combination colors and 15 auto light changing widely applies 

to RGB LED strip light,LED Module,etc

Technical Parameters(remote control)

1Power supply: AAA battery * 3pcs

2Cover Material:ABS

3Fabrication processing: multicolour printing & UV varnish

Technical Parameters(controller)

1. Working voltage:DC12V/24V

2. Output control: 3 circuits(R/G/B)

3. Control current:6A/circuit

4. Connecting mathod: common anode

5. Wireless frequency:433.92MHz

6. Receiving range:20meters

Functions of Keys

1. Key 1: on/off

2. Key 2: light changing mode(15 modes)

3. Key 3:color light/white light switching mode

4. Key 4: turn up(brightness/speed)

5. Key 5: turn down(brightness/speed)

How to use

1. Press Key 1 to turn on/off in any state.

2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.

3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice

 to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the 

color ring.

4. Resume fuction. The previous settings will be resumed while power on again

Matching code

Press Key 4 once within 3 seconds when power on again,.the light will blink 3 times if matching is successful.

Clearing Code Press Key 4 five times within 3 seconds when power on again,.the light will blink 6 times 

if clearing is successful.


Please don't touch or press the color ring while loading the battaries to ptrotec the  sensitiveness. Please use

 the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the

color ring is not sensitive.

RF wireless touched led rgb remote controller

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.